You are here: Home / Government/ Departments / Public Works / Utilities / Menlo Park Municipal Water / Water conservation / Detect a water leak

Detect a water leak

Determine if you have a leak

Turn off all faucets and water-using appliances
Locate your water meter and lift the cover to see the meter dial
If the needle is moving, you have a leak
If the needle appears to be still, record the meter reading or mark the needle position with a pencil or piece of tape
Keep the water off. Wait at least 15-30 minutes
Reread the meter gauge or check the needle location again. If the needle has moved, you could possibly have a leak somewhere in your system
If you have a leak, contact a plumber or leak detection agency to find the source

Shut off the main water valve to the inside of your house
Return to the water meter and lift the cover to see the meter dial
If the needle appears to be still, record the meter reading or mark the needle position with a pencil or piece of tape
Keep your water off and wait at least 15-30 minutes
If the needle has moved and the water is shut off to the house, you have a leak somewhere outside of the house
If the meter has not moved and the water to the house is shut off, your leak is somewhere inside the house

New water service and customer service
For account information, billing questions or to make a payment

Mon-Fri, 8:00 a.m. - 5:00 p.m.

Other water-related issues

Mon-Fri, 8:00 a.m. - 5:00 p.m., closed every other Friday

After-hours or weekends:

Report water waste
Online